3D Printing Powder High Purity Atomized Sphere Micron Nano Stainless Steel Powder
Product Name: Stainless Steel Powder.
Appearance: Silver gray powder.
Particle size: 200~1000 mesh.
The composition and particle size of stainless steel powder can be adjusted, and customized production can be provided for customers.
Features: Low oxygen content, high sphericity, good high-temperature resistance, oxidation resistance, corrosion resistance, and good fluidity.
| Pressing and sintering stainless steel powder series | |||||||||||||
| Grade | Chemical composition(%) | Loose density（g/cm3） | Mobility(s/50g) | Compressibility（g/cm3） | |||||||||
| Cr | Ni | Mo | Mn | Si | C | P | S | O | Fe | ||||
| 304L | 18-20 | 11-12 | 0.2 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | allowance | 2.5-3.0 | ≤30 | ≥6.55 | |
| 316L | 17-18 | 13-14 | 2-3 | 0.2 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | allowance | 2.5-3.0 | ≤30 | ≥6.60 |
| 317L | 19-20 | 14-15 | 3-4 | 0.2 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | allowance | 2.5-3.0 | ≤30 | ≥6.70 |
| 410L | 12-13 | 0.2 | 0.2 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | allowance | 2.5-3.0 | ≤30 | ≥6.70 | |
| 430L | 16-17 | 0.2 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | allowance | 2.5-3.0 | ≤30 | ≥6.45 | ||
| 434L | 17-18 | 1.0-1.5 | 0.2 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | allowance | 2.5-3.0 | ≤30 | ≥6.40 | |
| 1Cr18Ni9Ti | 17-19 | 8.0-1.2 | <0.2 | <1.0 | <0.1 | allowance | 2.5-3.0 | ≤30 | ≥6.70 | ||||
| Stainless steel powder and alloy powder for injection molding | |||||||||||||
| Grade | Chemical composition(%) | Compacted density（g/cm3） | Mobility(s/50g) | Compressibility（g/cm3 | |||||||||
| Cr | Ni | Mo | Si | C | P | S | O | Fe | |||||
| 304L | 18-20 | 11-12 | >6.55 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | remaining | 3.9-4.2 | ≤30 | ≥6.55 | |
| 316L | 17-18 | 13-14 | 2-3 | >6.60 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | remaining | 3.9-4.2 | ≤30 | ≥6.60 |
| 317L | 19-20 | 14-15 | 3-4 | >6.70 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | remaining | 3.9-4.2 | ≤30 | ≥6.70 |
| 410L | 12-13 | >6.70 | 0.8 | <0.03 | <0.03 | <0.02 | <0.3 | remaining | 3.8-4.0 | ≤30 | ≥6.70 | ||
| 9Cr18 | 17-19 | >6.45 | 0.8 | 0.9-1.0 | <0.035 | <0.02 | <0.3 | remaining | 3.3-3.9 | ≤30 | ≥6.45 | ||
| 9Cr1.5 | 1.3-1.7 | >6.40 | 0.8 | 0.95-1.05 | <0.03 | <0.02 | <0.3 | remaining | 3.3-3.9 | ≤30 | ≥6.40 | ||
Application:
- Used for powder metallurgy compression molding, metal injection molding, thermal spraying, metal shot blasting, metal filter cartridges, sintered filters, chemical fiber spinning filter materials – stainless steel sand, 3D printing, etc.
- Used for surface strengthening and protection of components such as shafts, plungers, shaft necks, compressor cylinders, pistons, paper drying, etc.
- Used in aerospace, medical equipment, automotive manufacturing, porous materials, spray materials, hot isostatic pressing, etc.